NEC Univerge SV8100 - Page 520

Issue 1.0 UNIVERGE SV8100
2 - 496 D
term
series i Multiline Terminals
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
Turns Off or On the extension ability
to receive a second call from a DID,
DISA, DIL, or tie line caller.
 With this option set to 1, the
destination extension must be
busy for a second DNIS caller
to ring through. If the
destination extension does not
have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless of
this program setting.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
Turns Off or On the Caller ID
display at an extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-09-03 Class of Service Options
(Incoming Call Service) – Sub
Address Identification
Define whether an extension
displays the Caller Sub-Address.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-09-04 Class of Service Options
(Incoming Call Service) –
Notification for Incoming Call
List Existence
Determine whether or not the
CHECK LIST message is displayed
to indicate a missed call
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-09-05 Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
Turns Off or On an extension user
ability to enable Handsfree
Answerback or Forced Intercom
Ringing for their incoming Intercom
calls.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-09-06 Class of Service Options
(Incoming Call Service) –
Incoming Time Display
If this option is set to 1, the
Incoming Call Time is displayed on
the multiline terminal LCD while the
telephone is ringing.
0 = Off
1 = On
(default = 0 for COS
01~15)
3
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
Turns Off or On an extension user
ability to have calls queued if a call
rings the extension when it is busy.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-09-08 Class of Service Options
(Incoming Call Service) – Calling
Party Information
Turns Off or On and extension
ability to display calling party
information on CCIS calls.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-10-01 Class of Service Options
(Answer Service) – Group Call
Pickup (Within Group)
Turns Off or On Group Call Pickup
for calls ringing an extension Pickup
Group as well as ring group calls
(Service Code 
#).
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3