NEC Univerge SV8100 - Page 529

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 505
20-14-07 Class of Service Options for
DISA/E&M – External Paging
This option Enables or Disables a
DISA or tie trunk caller ability to
use the telephone system External
Paging.
0 = Off
1 = On
(default = 0 for COS
1~15)
3
20-14-08 Class of Service Options for
DISA/E&M – Direct Trunk Access
This option Enables or Disables a
DISA or tie trunk caller ability to use
Direct Trunk Access (Service Code
715).
0 = Off
1 = On
(default = 0 for COS
1~15)
3
20-14-09 Class of Service Options for
DISA/E&M – Forced Trunk
Disconnect <Not for ISDN T-
point>
This option Enables or Disables a
tie trunk caller ability to use Forced
Trunk Disconnect (Service Code
26). This option is not available to
DISA callers.
0 = Off
1 = On
(default = 0 for COS
1~15)
3
20-14-10 Class of Service Options for
DISA/E&M – Call Forward Setting
by Remote via DISA
Enable or Disable a DISA caller
ability to use the Call Forward
service codes (Program 11-11-01
through Program 11-11-05).
0 = Off
1 = On
(default = 0 for COS
1~15)
3
20-14-11 Class of Service Options for
DISA/E&M – DISA/Tie Trunk
Barge-In
In an extension Class of Service,
Enable (1) or Disable (0) a DISA or
tie trunk user from using Barge-In.
0 = Off
1 = On
(default = 0 for COS
1~15)
3
20-14-12 Class of Service Options for
DISA/E&M – Retrieve Park Hold
Turns Off or On the ability for a
DISA caller to retrieve parked or
held calls.
0 = Off
1 = On
(default = 0 for COS
1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3