NEC Univerge SV8100 - Page 528

Issue 1.0 UNIVERGE SV8100
2 - 504 D
term
series i Multiline Terminals
20-13-47 Class of Service Options
(Supplementary Service) –
Station Name Display
Determine if a station Number is
displayed (On) or not displayed
(Off) in the LCD when the phone is
idle.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-48 Class of Service Options
(Supplementary Service) –
Station Name Display
Determine if a station Number is
displayed (On) or not displayed
(Off) in the LCD when the phone is
idle.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-49 Class of Service Options
(Supplementary Service) – BLF
Indication on CO Incoming State
Determine if a BLF of the station
lights when a Normal CO call is
ringing the phone.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-50 Class of Service Options
(Supplementary Service) – AIC
Agent display which call is from
Determine if the station logged in
via AIC codes shows which queue
the call is coming from.
0 = Unlisted
1 = Listed
(default = 1 for
COS 1~15)
3
20-13-51 Class of Service Options
(Supplementary Service) –
Number and Name appear in the
directory
Determine if an extension name
and number are listed (On) or
unlisted (Off) in the directory.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-14-01 Class of Service Options for
DISA/E&M – First Digit
Absorption (Delete First Digit
Dialed)
For Tie Lines, Enable or Disable the
ability to absorb (ignore) the first
incoming digit. Use this to make the
tie trunk compatible with 3- and 4-
digit Tie Line service. This option
does not apply to DISA.
0 = Off
1 = On
(default = 0 for COS
1~15)
3
20-14-02 Class of Service Options for
DISA/E&M – Trunk Group
Routing/ARS Access
This option Enables or Disables a
DISA or tie trunk caller ability to dial
9 for Trunk Group Routing or
Automatic Route Selection.
0 = Off1
= On
(default = 1 for COS
1~15)
3
20-14-03 Class of Service Options for
DISA/E&M – Trunk Group
Access
This option Enables or Disables a
DISA or tie trunk caller ability to
access trunk groups for outside
calls (Service Code 704).
0 = Off
1 = On
(default = 1 for COS
1~15)
3
20-14-04 Class of Service Options for
DISA/E&M – Outgoing System
Speed Dialing
This option Enables or Disables a
DISA or tie trunk caller ability to use
System Speed Dialing.
0 = Off
1 = On
(default = 0 for COS
1~15)
3
20-14-05 Class of Service Options for
DISA/E&M – Operator Calling
This option Enables or Disables a
DISA or tie trunk caller ability to dial
0 for the telephone system
operator.
0 = Off
1 = On
(default = 0 for COS
1~15)
3
20-14-06 Class of Service Options for
DISA/E&M – Internal Paging
This option Enables or Disables a
DISA or tie trunk caller’s ability to
use the telephone system Internal
Paging.
0 = Off
1 = On
(default = 0 for COS
1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3