NEC Univerge SV8100 - Page 564

Issue 1.0 UNIVERGE SV8100
2 - 540 Flexible Timeouts
24-01-06 System Options for Hold – Park
Hold Time - Normal
Set the Park Hold Time (0~64800
seconds). A call that is parked
longer than the programmed
interval recalls the extension where
it was initially parked.
Refer to Flexible System
Numbering on page 2-515 for
setting Flexible Timeouts for Class
of Service.
0~64800 (seconds)
(default = 90 seconds)
3
24-02-03 System Options for Transfer –
Delayed Call Forwarding Time
Set the Delayed Call Forwarding
interval. For an unanswered call,
Call Forward No Answer occurs
after this interval.
0~64800 (seconds)
(default = 10)
3
24-02-04 System Options for Transfer –
Transfer Recall Time
Set the Transfer Recall Time. An
unanswered transferred call recalls
to the extension that initially
transferred it after this interval. This
time also sets how long a
transferred call camps-on to a busy
extension.
0~64800 (seconds)
(default = 30)
3
25-07-02 System Timers for VRS/DISA –
VRS/DISA No Answer Time
A VRS/DISA caller can ring an
extension for this time before the
system sets the call as a Ring No
Answer. After this time expires, the
call follows the programmed Ring
No Answer routing (set in Program
25-03 and Program 25-04).
0~64800 (seconds)
(default = 0 seconds)
3
25-07-03 System Timers for VRS/DISA –
Disconnect after VRS/DISA
retransfer to IRG
Define the system timers which
affect DID and DISA after VRS/
DISA retransfer to IRG.
0~64800 (seconds)
(default = 60 seconds)
3
25-07-07 System Timers for VRS/DISA –
Long Conversation Warning
Tone Time
Determine the time a DISA caller or
any trunk-to-trunk (such as Tandem
Trunking) conversation can talk
before the Long Conversation tone
is heard.
0~64800 (seconds)
(default = 1800
seconds)
3
25-07-08 System Timers for VRS/DISA –
Long Conversation Disconnect
Time
This time determines how long the
system waits before disconnecting
a DISA caller or any trunk-to-trunk
(such as Tandem Trunking)
conversation call after the Long
Conversation tone is heard.
0~64800 (seconds)
(default = 30 seconds)
3
25-07-09 System Timers for VRS/DISA –
DISA Internal Paging Time
This is the maximum length of an
Internal Page placed by a DISA
caller. If the Page continues longer
than this time, the system
terminates the DISA call.
0~64800 (seconds)
(default = 30 seconds)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3