UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 545
Operation
To disconnect a busy trunk:
Multiline Terminal
1. Press line key for trunk.
- OR -
Dial trunk access code (#0 + trunk number).
You hear busy tone. Trunk numbers are 001~200.
2. Dial the Service Code (not set at default).
You hear confirmation beeps as the system disconnects the trunk.
You can now place a call on the free trunk.
3. Press the line key for the trunk disconnected in Step 2.0
Dial the trunk access code (
#0 + trunk number) for the trunk disconnected in Step 2.
Single Line Telephone
1. Dial trunk access code (
#9 + trunk number).
You hear busy tone. Trunk numbers are 001~200.
2. Dial Service Code (not set at default).
You hear confirmation beeps as the system disconnects the line.
3. Hookflash.
You can now place a call on the free line.
4. Dial the trunk access code (#0 + trunk number) for the trunk disconnected in Step 2.
To Next Page
Loading...
