NEC Univerge SV8100 - Page 57

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 33
Printing System Information Reports:
E-mailing Alarm Reports:
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
90-13-01 System Information Output –
Output Port Type
Indicate the type of connection
system information.
0 = No Setting
4 = CTA/CTU
5 = USB
(default = 0)
3
90-13-02 System Information Output –
Destination Extension Number
If the output port type (Program
90-13-01) is set to CTA, enter the
extension number with the CTA
connection.
Extension Number (up
to eight digits)
(default not assigned)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
10-12-01 CD-CP00-AU Network Setup – IP
Address
Assign the IP Address. 0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.254.255.254
192.0.0.1 ~
223.255.255.254
(default = 192.168.0.10)
3
10-12-02 CD-CP00-AU Network Setup –
Subnet Mask
The setting of Subnet Mask is
invalid when all Host Addresses
are 0.
If the network section is:
0,
127,
128.0,
191.255,
192.0.0,
223.255.255
The setting of Subnet Mask is
invalid
.
128.0.0.0 192.0.0.0
224.0.0.0 240.0.0.0
248.0.0.0 252.0.0.0
254.0.0.0 255.0.0.0
255.128.0.0
255.192.0.0
255.224.0.0
255.248.0.0
255.252.0.0
255.254.0.0
255.255.0.0
255.255.128.0
255.255.192.0
255.255.224.0
255.255.248.0
255.255.252.0
255.255.254.0
255.255.255.0
255.255.255.128
255.255.255.192
255.255.255.224
255.255.255.240
255.255.255.248
255.255.255.252
255.255.255.254
255.255.255.255
(default =
255.255.255.0)
3