NEC Univerge SV8100 - Page 600

Issue 1.0 UNIVERGE SV8100
2 - 576 Hold
Operation
System Hold
To place an outside call on System Hold:
Press Hold.
To pick up an outside call on System Hold:
Press the flashing CAP key.
- OR -
If you know the specific line number, dial 672 + Line number (001~200).
Exclusive Hold
To place an outside call on Exclusive Hold:
Press the Exclusive Hold key (Program 15-07-01 or SC 751: 45).
- OR -
Press Feature + Hold.
Single Line Telephone
1. Hookflash.
2. Dial 749.
To pick up an outside call on Exclusive Hold:
Press flashing CAP key.
Single Line Telephone
Dial 759.
24-01-05 System Options for Hold –
Forced Release of Held Call
Set the Forced Release of Held
Calls interval. If enabled in Program
14-01-16, the system disconnects a
call if on Hold longer than this
interval.
0~64800 (seconds)
(default = 1800 seconds)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3