NEC Univerge SV8100 - Page 599

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 575
16-02-01 Department Group
Assignment for Extensions
Set up the Department Group
called by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in
23-02.
Department Groups 1-64
Priority 1-512
Default = All extensions in
Department Group 1 with
priority in port order:
Port 1 priority = 1
Port 512 priority = 512
3
20-06-01 Class of Service for
Extensions
Assign a Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension ports =
Class 1
3
20-11-09 Class of Service Options
(Hold/Transfer Service) –
Group Hold Initiate
In an extension Class of Service,
enable (1) or disable (0) an
extension ability to initiate Group
Hold (Service Code 732).
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-10 Class of Service Options
(Hold/Transfer Service) –
Group Hold Answer
In an extension Class of Service,
enable (1) or disable (0) an
extension ability to pick up a call
placed on Group Hold (Service
Code 762).
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-13 Class of Service Options
(Hold/Transfer Service) –
Operator Transfer After Hold
Callback
Turns Off or On an extension ability
to have a call which recalls from
Hold transfer to the operator.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-17-01 Operator Extension –
Operator’s Extension
Number
Define the extension numbers
which are to be used by operators.
Up to eight digits
(default = 101)
3
24-01-01 System Options for Hold –
Hold Recall Time
Set the Hold Recall Time. A call on
Hold recalls the extension that
placed it on Hold after this time.
0~64800 (seconds)
(default = 90 seconds)
3
24-01-02 System Options for Hold –
Hold Recall Callback Time
Set the Hold Recall Callback Time.
A trunk recalling from Hold rings an
extension for this time.
0~64800 (seconds)
(default = 0 seconds)
3
24-01-03 System Options for Hold –
Exclusive Hold Recall Time
Set the Exclusive Hold Recall Time.
A call on Exclusive Hold recalls the
extension that placed it on Hold
after this time.
0~64800 (seconds)
(default = 90 seconds)
3
24-01-04 System Options for Hold –
Exclusive Hold Recall
Callback Time
Set the Hold Recall Time. A trunk
recalling from Hold rings an
extension for this time. If still
unanswered, the call changes to
System Hold.
0~64800 (seconds)
(default = 0 seconds)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3