NEC Univerge SV8100 - Page 617

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 593
42-03-07 Class of Service Options (Hotel/
Motel) – Restriction Class
Changing for Other Extension
Use to set the Hotel/Motel
restriction class changing for other
extension Class of Service (COS)
options.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
42-03-08 Class of Service Options (Hotel/
Motel) – Room to Room Call
Restriction
Use to set the Hotel/Motel room to
room call restriction Class of
Service (COS) options.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
42-03-09 Class of Service Options (Hotel/
Motel) – DND Setting for Own
Extension
Use to set the Hotel/Motel DND
setting for own extension Class of
Service (COS) options.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
42-03-10 Class of Service Options (Hotel/
Motel) – Wake Up Call Setting for
Own Extension
Use to set the Hotel/Motel wake up
call setting for own extension Class
of Service (COS) options.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
42-03-11 Class of Service Options (Hotel/
Motel) – Change Room Status for
Own Extension
Use to set the Hotel/Motel change
room status for own extension
Class of Service (COS) options.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
42-03-12 Class of Service Options (Hotel/
Motel) – SLT Room Monitor
Enable (1) or disable (0) a single
line telephone ability to use Room
Monitor.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
42-04-01 Hotel Mode One-Digit Service
Codes
Use to set up the Hotel Mode
one-digit service codes which are
assigned in Program 42-02-01.
1~64 (Calling Group)
Up to eight digits
1~9, 0, ,
#
(default not assigned)
3
42-05-01 Hotel Room Status Printer –
Output Port Type
Use to set the LAN port to output
the Hotel Data (Check-Out sheet,
Room Status, etc.) and the output
port type options for the Hotel/
Motel feature.
0 = No Setting
1 = CTA
2 = Not Used
3 = LAN
(default = 0)
3
42-05-02 Hotel Room Status Printer –
Output Destination Number
Use to set the LAN port to output
the Hotel Data (Check-Out sheet,
Room Status, etc.) and the output
destination number options for the
Hotel/ Motel feature.
Up to eight digits
(Extension number
which CTA/CTU is
equipped)
(default not assigned)
3
42-05-03 Hotel Room Status Printer –
Wake Up Call No Answer Data
Use to set the LAN port to output
the Hotel Data (Check-Out sheet,
Room Status, etc.) and the wake up
call no answer data options for the
Hotel/ Motel feature.
0 = Not Output
1 = Output
2 = Not Used
3 = LAN
(default = 0)
3
42-05-04 Hotel Room Status Printer –
Check-Out Sheet
Use to set the LAN port to output
the Hotel Data (Check-Out sheet,
Room Status, etc.) and the
check-out sheet options for the
Hotel/ Motel feature.
0 = Not Output
1 = Output
2 = Not Used
3 = LAN
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3