NEC Univerge SV8100 - Page 618

Issue 1.0 UNIVERGE SV8100
2 - 594 Hotel/Motel
Refer to the UNIVERGE SV8100 Hotel/Motel Services Guide for complete programming information.
Operation
Refer to the UNIVERGE SV8100 Hotel/Motel Services Guide for complete operation information.
42-06-01 PMS Service Setting – PMS Port
Number
Use to set the PMS port number
when using the PMS feature.
0~65535
(default = 5129)
3
42-06-02 PMS Service Setting – 3:00 AM
Auto Room Scan
At 3:00 AM sets maid required
status for all checked-in rooms.
0 = Off
1 = On
(default = 0)
3
42-06-03 PMS Service Setting – CheckIn
Message Type
Use to set the check-in message
type when using the PMS feature.
0 = Off
1 = On
(default = 0)
3
42-06-04 PMS Service Setting – CheckOut
Auto Status Change
Use to set the checkout auto status
change when using the PMS
feature.
0 = Off
1 = On
(default = 0)
3
42-06-05 PMS Service Setting –
AREYUTHERE/LINETEST Send
Timing
Use to set the AREYUTHERE/
LINETEST send timing when using
the PMS feature.
1~128 (seconds)
(default = 10)
3
42-06-06 PMS Service Setting –
AREYUTHERE/LINETEST Send
Count
Use to set the AREYUTHERE/
LINETEST send count when using
the PMS feature.
0~20 (times)
(default = 3)
3
42-07-01 PMS Restriction Level
Conversion Table
Use to change the default Toll
Restriction class on check in for a
room (Program 42-02-02).
1~15
Default:
Level 0 = 10
Level 1 = 11
Level 2 = 12
Level 3 = 13
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3