NEC Univerge SV8100 - Page 621

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 597
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
15-07-01 Programmable Function
Keys
Assign a function key for Hotline
(code 01 + partner’s extension
number).
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

00 ~

99 (Appearance
Function Code) (Service
Code 752 by default)
3
15-02-22 Multiline Telephone Basic
Data Setup – Multiple
Incoming From Intercom and
Trunk
When this option is set to 0
(disabled), incoming calls to an
extension indicate on any Hotline key
for that extension as solid (busy).
When this option is set to 1
(enabled), lighting is determined by
the setting of Program 22-01-01
Incoming Call Priority. If set to trunk
priority (1), the Hotline key lights solid
when a trunk call rings in. If set to
intercom priority (0), the Hotline key
does not light for incoming trunk
calls, but lights solid for intercom
calls.
0 = Disable
1 = Enable
(default = 1)
3
20-06-01 Class of Service for
Extensions
Assign a Class of Service to
extensions (1~15).
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension ports
= Class 1
3
20-08-09 Class of Service Options
(Outgoing Call Service) –
Hotline/Extension Ringdown
Turns Off or On hotline or ringdown
for extensions with this COS.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-19 Class of Service Options
(Outgoing Call Service) –
Hotline for SPK
Turns Off or On an extensions’ ability
to activate hotline or ringdown when
pressing the Speaker key.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-06 Class of Service Options
(Hold/Transfer Service) –
Unscreened Transfer (Ring
Inward Transfer)
Turns Off (0) or On (1) an extension
ability to use Unscreened Transfer.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-11 Class of Service Options
(Hold/Transfer Service) –
Automatic On-Hook Transfer
Turns Off (0) or On (1) an extension
ability to use Automatic On-Hook
Transfer.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3