NEC Univerge SV8100 - Page 622

Issue 1.0 UNIVERGE SV8100
2 - 598 Hotline
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook
Signaling (Automatic
Override)
Program 20-02-03 and Program 20-
13-06 set the conditions under which
a Hotline, Reverse Voice Over or
DSS Console key indicates that an
extension is busy. With condition 1 in
the following chart, the BLF LED is
on only when both extension line
appearances are busy. In conditions
2~4, the BLF LED is on when one
line appearance is busy.
0 = Off
1 = On
(default = 1 for
COS 1~15)
Refer to Table 2-16
Extension Busy Setup on
page 2-599
3
21-01-09 System Options for Outgoing
Calls – Ringdown Extension
Timer (Hotline Start)
A Ringdown extension automatically
calls its programmed destination after
this time.
0~64800
(default = 0)
3
21-11-01 Extension Ringdown
(Hotline) Assignment
Define the Hotline destination
number for each extension number.
(maximum 24 digits)
0, ,
#, Pause, Hook
Flash, @ (Code to wait
for answer supervision)
(default not assigned)
3
22-01-01 System Options for Incoming
Calls – Incoming Call Priority
Use this option to determine if
Intercom calls or trunk calls have
answer priority when both are ringing
simultaneously.
0 = Intercom call priority
1 = Trunk call priority
(default = 1)
3
30-05-02 DSS Console Lamp Table –
Busy Extension
Use to define the LED patterns for
busy extensions on the DSS
consoles.
0~7
[default = 7 (On)]
3
30-05-03 DSS Console Lamp Table –
DND Extension
Use to define the LED patterns for
DND extensions on the DSS
consoles.
0~7
[default = 3 (RW)]
3
30-05-04 DSS Console Lamp Table –
ACD Agent Busy
Use to define the LED patterns for
busy ACD agents function on the
DSS consoles.
0~7
[default = 7 (On)]
3
30-05-05 DSS Console Lamp Table –
Out of Schedule (ACD DSS)
Use to define the LED patterns for
out of schedule (ACD/DSS) on the
DSS consoles.
0~7
[default = 0 (Off)]
3
30-05-06 DSS Console Lamp Table –
ACD Agent Log Out (ACD
DSS)
Use to define the LED patterns for
ACD agents that are logged out on
the DSS consoles.
0~7
[default = 5 (IL)]
3
30-05-07 DSS Console Lamp Table –
ACD Agent Log In (ACD DSS)
Use to define the LED patterns for
ACD agents that are logged in the
DSS consoles.
0~7
[default = 4 (IR)]
3
30-05-08 DSS Console Lamp Table –
ACD Agent Emergency (ACD
DSS)
Use to define the LED patterns for
ACD agents in emergency on the
DSS consoles.
0~7
[default = 6 (IW)]
3
30-05-09 DSS Console Lamp Table –
Hotel Status Code 1 (Hotel
DSS)
Use to define the LED patterns for
hotel status code 1 on the DSS
consoles.
0~7
[default = 7 (On)]
3
30-05-10 DSS Console Lamp Table –
Hotel Status Code 2 (Hotel
DSS)
Use to define the LED patterns for
hotel status code 2 on the DSS
consoles.
0~7
[default = 1 (FL)]
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3