NEC Univerge SV8100 - Page 638

Issue 1.0 UNIVERGE SV8100
2 - 614 IP Multiline Station (SIP)
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
 Level 1 – these are the most commonly assigned programs for this feature.
 Level 2 – these are the next most commonly assigned programs for this feature.
 Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
10-12-02 CD-CP00-AU Network Setup –
Subnet Mask
The setting of Subnet Mask is
invalid when all Host Addresses
are 0.
If the network section is:
0,
127,
128.0,
191.255,
192.0.0,
223.255.255
The setting of Subnet Mask is
invalid
.
128.0.0.0 240.0.0.0
254.0.0.0
255.192.0.0
255.252.0.0
255.255.128.0
255.255.248.0
255.255.255.0
255.255.255.224
255.255.255.252
192.0.0.0 248.0.0.0
255.0.0.0
255.224.0.0
255.254.0.0
255.255.192.0
255.255.252.0
255.255.255.128
255.255.255.240
255.255.255.254
224.0.0.0 252.0.0.0
255.128.0.0
255.248.0.0
255.255.0.0 (Default)
255.255.224.0
255.255.254.0
255.255.255.192
255.255.255.248
255.255.255.255
(default = 255.255.0.0)
3
10-12-03 CD-CP00-US Network Setup –
Default Gateway
Assign the default gateway IP
address for the CD-CP00-AU.
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.254.255.254
192.0.0.1 ~
223.255.255.254
(default = 0.0.0.0)
3