NEC Univerge SV8100 - Page 639

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 615
10-12-09 CD-CP00-US Network Setup – IP
Address
Set for IPLA. 0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default = 172.16.0.10)
3
10-26-01 IP System Operation Setup –
Peer to Peer Mode
Use to Enable or Disable the Peer
to Peer feature for SIP IP stations.
0 = Off
1 = On
(default = 1)
3
15-05-15 Extension, Basic Setup – Peer to
CODEC Type
Use this program to set the
registered IP Phone Codec type –
Reference Program 84-11 Dterm IP
Codec Basic Information.
1-Type 1
2-Type 2
3-Type 3
4-Type 4
5-Type 5
(default = 1)
3
84-10-01 ToS Setup – ToS Mode When Input Data is set to 1, Item
No. 07 is invalid. When Data is set
to 2, Item No. 02 ~ 06 are invalid.
0 = Disable (Invalid)
1 = IP Precedence
2 = Diffserv
(default = 0)
3
84-10-07 ToS Setup – Priority (D.S.C.P. -
Differentiated Services Code
Point)
DSCP (Differentiated Services
Code Point).
0~63
(default = 0)
3
84-11-28 Dterm IP CODEC Basic Setup –
Audio Capability Priority
Use to set voice (RTP packet)
encoding parameters.
0 = G.711_PT
2 = G.729_PT
(default = 0)
3
84-22-01 DT700 Multiline Logon
Information Setup – User ID
Input the User ID for each Personal
ID Index (1-512) when using auto or
manual registration in 10-46-01.
 IP Multiline terminals only
support numerical user IDs,
not alphanumeric.
Up to 32 characters
(default not assigned)
84-22-02 DT700 Multiline Logon
Information Setup – Password
Input the Password for each
Personal ID Index (1-512) when
using auto or manual registration in
10-46-01.
Up to 16 characters
(default not assigned)
84-22-03 DT700 Multiline Logon
Information Setup – User ID
Omission
Enable or Disable User ID
Omission.
 Used when the registration
mode (10-46-01) is set to
manual. When the phone
prompts for a login, the
previous user ID will appear so
the user only has to enter the
password.
0 = Off1 = On
(default = 0)
84-22-04 DT700 Multiline Logon
Information Setup – Log Off
Enable or Disable the ability for the
IP Multiline to log off or be
overridden.
0 = Off1 = On
(default = 1)
84-22-05 DT700 Multiline Logon
Information Setup – Nick Name
Input the Personal ID from terminal
automatically when log on again.
Up to 32 characters
(default not assigned)
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3