UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 41
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
10-03-01 ETU Setup (DLC PKG Setup) –
Terminal Type (B1)
Assigns or displays the current
terminal type assigned to B Channel
1 for each port on the DLC.
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
3
10-03-06 ETU Setup (DLC PKG Setup) –
Terminal Type (B2)
Assigns or displays the current
terminal type assigned to B Channel
2 for each port on the ESI.
0 = Not set
6 = PGD(2)-U( ) ADP
(Paging)
7 = PGD(2)-U( ) ADP
(Tone Ringer)
8 = PGD(2)-U( ) ADP
(Door Box)
9 = PGD(2)-U( ) ADP
(ACI)
12 = APR (B2 Mode)
(default = 0)
3
11-06-01 ACI Extension Numbering Assign extension numbers to ACI
software ports. Select a number
outside of the normal extension
number range.
ACI Ports: 1~96
(default not assigned)
3
11-08-01 ACI Group Pilot Number Assign pilot numbers to ACI groups.
When a user dials the pilot number,
they reach an available ACI software
port within the group.
ACI Groups 1~16
(default not assigned)
3
To Next Page
Loading...
