NEC Univerge SV8100 - Page 66

Issue 1.0 UNIVERGE SV8100
2 - 42 Analog Communications Interface (ACI)
14-09-01 Conversation Recording
Destination for Trunks – ACI
Recording Destination Extension
Number
Use this option to assign the ACI Call
Recording destination per trunk. The
destination can be an ACI port
extension number (assigned in
Program 11-06-01) or an ACI
Department Group pilot number
(assigned in Program 11-08-01). If
destinations are assigned in
Program 14-09 and Program 15-12,
the destination in Program 15-12 is
followed.
Extension Number =
Maximum eight digits
(default not assigned)
3
14-09-02 Conversation Recording
Destination for Trunks – ACI
Automatic Recording for
Incoming Calls
Determine whether or not a trunk
should be automatically recorded
when an incoming call is received.
0 = Off
1 = On
(default = 0)
3
15-07-01 Programmable Function Keys If required, program and ACI
Conversation Record Key (code 69 +
0). This key allows an extension user
to press the key to manually record a
call to the ACI.
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

00 ~

99 (Appearance
Function Code) (Service
Code 752 by default)
3
15-12-01 Conversation Recording
Destination for Extensions – ACI
Recording Destination Extension
Number
Use this option to assign the ACI Call
Recording destination on a per
extension basis. The destination can
be an ACI port extension number
(assigned in Program 11-06) or an
ACI Department Group pilot number
(assigned in Program 11-08). If
destinations are assigned in
Program 14-09 and Program 15-12,
the destination in Program 15-12 is
followed.
Extension Number =
Maximum eight digits
(default not assigned)
3
15-12-02 Conversation Recording
Destination for Extensions – ACI
Automatic Recording for
Incoming Calls
Determine whether or not an
extension should be automatically
recorded when an incoming call is
received.
0 = Off
1 = On
(default = 0)
3
33-01-01 ACI Port Type Setup – ACI Type Set each ACI software port for input
(1) or input/output (2). Use input
ports for Music on Hold sources. Use
output ports for External Paging/
ringer control.
ACI Ports: 1~96
ACI Types:
0 = None
1 = MOH/BGM (Input)
2 = External Audio
Port (Input/Output
(default = 2)
3
33-02-01 ACI Department Calling Group –
Group Number
Assign ACI software ports to ACI
Department Groups. This lets ACI
callers connect to ACI software ports
by dialing the group pilot number (set
in Program 11-08).
ACI Ports: 1~96
ACI Groups: 1~16
Default:
ACI Port/Group/Priority
01/ 1/ 1
02/ 1/ 2
: / :/ :
96/ 1/ 96
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3