NEC Univerge SV8100 - Page 658

Issue 1.0 UNIVERGE SV8100
2 - 634 IP Trunk – (SIP) Session Initiation Protocol
10-12-11 CD-CP00-AU Network Setup –
NIC Setup
Use this program to define the
LAN interface Speed and Mode of
the VoIP Application supported.
0 = Auto Detect
1 = 100 Mbps, Full
Duplex
2 = 100 Mbps, Half
Duplex
3 = 10 Mbps, Full Duplex
4 = 10 Mbps, Half Duplex
(default = 0)
3
10-19-01 VoIP DSP Resource Selection Select type of IPLA DSP
Resource. This program setting
has no affect on the terminal/trunk
port assignment or usage.
0 = Common
1 = IP Extension
2 = SIP Trunk
3 = CCIS
4 = Use for NetLink
5 = Blocked
Default:
Resource 1 = 1
Resource 2~128 = 0
3
10-23-01 SIP System Interconnection
Setup – System Interconnection
Used to determine if the system is
interconnected to another system.
0 = No (Disable)
1 = Yes (Enable)
(default = 0)
3
10-23-02 SIP System Interconnection
Setup – IP Address
Use this program to define the IP
Address of the SIP System
Interconnection.
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default = 0.0.0.0)
3
10-23-04 SIP System Interconnection
Setup – Dial Number
Use this program to define Dial
Number for the SIP System
Interconnection.
Up to 12 digits (0~9)
(default not assigned)
3
10-28-01 SIP System Information Setup –
Domain Name
Use this program to define the
Domain name. This information is
generally provided by the SIP
carrier.
Up to 64 Characters
(default not assigned)
3
10-28-02 SIP System Information Setup –
Host Name
Use this program to define the
Domain name. This information is
generally provided by the SIP
carrier.
Up to 48 Characters
(default not assigned)
3
10-28-03 SIP System Information Setup –
Transport Protocol
Use this program to define the
Transport type. This option is
always set to UDP.
0 = UDP
1 = TCP
(default = 0)
3
10-28-04 SIP System Information Setup –
User ID
Use this program to define the
User ID.
Up to 32 Characters
When assigning the User
ID, the ID may contain
only alpha characters. (A
space and/or special
characters are not
allowed in the User ID
field).
(default not assigned)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3