NEC Univerge SV8100 - Page 657

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 633
10-12-07 CD-CP00-AU Network Setup –
NAPT Router IP Address
(G/W[WAN])
Used to define the IP Address of
the WAN side of the router.
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default = 0.0.0.0)
3
10-12-08 CD-CP00-AU Network Setup –
ICMP Redirect
When receiving ICMP redirect
messages, this determines if the
IP Routing Table updates
automatically or not.
0=No (Disable)
1=Yes (Enable)
(default = 0)
3
10-12-09 CD-CP00-AU Network Setup – IP
Address
Set for IPLA. 0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default = 172.16.0.10)
3
10-12-10 CD-CP00-AU Network Setup –
Subnet Mask
Use this program to define the
Media Gateway Subnet Mask
Address.
128.0.0.0
192.0.0.0
224.0.0.0
240.0.0.0
248.0.0.0
252.0.0.0
254.0.0.0
255.0.0.0
255.128.0.0
255.192.0.0
255.224.0.0
255.240.0.0
255.248.0.0
255.252.0.0
255.254.0.0
255.255.0.0
255.255.128.0
255.255.192.0
255.255.224.0
255.255.240.0
255.255.248.0
255.255.252.0
255.255.254.0
255.255.255.0
255.255.255.128
255.255.255.192
255.255.255.224
255.255.255.240
255.255.255.248
255.255.255.252
255.255.255.254
255.255.255.255
(default = 255.255.0.0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3