NEC Univerge SV8100 - Page 674

Issue 1.0 UNIVERGE SV8100
2 - 650 IP Trunk – H.323
44-02-03 Dial Analysis Table for ARS/
F-Route Access – Additional
Data
If a Service Type is selected in
Program 44-02-02, set the
additional data, if required, for the
Pre-Transaction Table for selecting
ARS/F-Route (24 digits max: 1~9, 0

#, @). To enter a wild card/don’t
care digit, press Line Key 1 to enter
an @.
1 = Delete Digit =
0~255 (255 : Delete All
Digits)
2 = 0~500
(0 = No Setting)
3 = Dial Extension
Analyze Table Number
= 0~4
(0 = No Setting)
(default = 0)
3
44-05-01 ARS/F-Route Table – Trunk
Group Number
Select the trunk group number to be
used for the outgoing ARS call.
0~100, 255
0 = No Setting
255 = Extension Call
(default = 0)
3
44-05-09 ARS/F-Route Table – Maximum
Digit
Input the maximum number of digits
to send when using the F-Route.
0~24
(default = 0)
3
84-01-02 H.323 Trunk Basic Information
Setup – Number of G.711 audio
frames
Use to define the number of G.711
Audio Frames.
1~4
(default = 3)
3
84-01-03 H.323 Trunk Basic Information
Setup – G.711 VAD mode
Use to define the G.711 VAD mode
for H.323.
0 = Disable
1 = Enable
(default = 0)
3
84-01-04 H.323 Trunk Basic Information
Setup – G.711 Type
Use to define the G.711 type for
H.323.
0 = A-law
1 = u-law
(default = 1)
3
84-01-05 H.323 Trunk Basic Information
Setup – Number of G.729 audio
frames
Use to define the number of G.729
audio frames for H.323.
1~6
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
5 = 50ms
6 = 60ms
(default = 3)
3
84-01-06 H.323 Trunk Basic Information
Setup – G.729 VAD mode
Use to define the G.729 VAD mode
for H.323.
0 = Disable
1 = Enable
(default = 0)
3
84-01-07 H.323 Trunk Basic Information
Setup – G.729 Jitter Buffer (min)
Use to define the G.729 jitter buffer
(minimum) for H.323.
0~270ms
(default = 30)
3
84-01-08 H.323 Trunk Basic Information
Setup – G.729 Jitter Buffer
(average)
Use to define the G.729 jitter buffer
(average) for H.323.
0~270ms
(default = 60)
3
84-01-09 H.323 Trunk Basic Information
Setup – G.729 Jitter Buffer (max)
Use to define the G.729 jitter buffer
(maximum) for H.323.
0~270ms
(default = 120)
3
84-01-11 H.323 Trunk Basic Information
Setup – Number of G.723 audio
frames
Use to define the number of G.723
audio frames for H.323.
1~2
(default = 1)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3