NEC Univerge SV8100 - Page 678

Issue 1.0 UNIVERGE SV8100
2 - 654 IP Trunk – H.323
Operation
None
84-01-59 H.323 Trunk Basic Information
Setup – FAX Relay Function
Use to define the FAX relay function
for H.323.
0 = Disable
1 = Enable
2 = Each port mode
(default = 0)
3
84-01-60 H.323 Trunk Basic Information
Setup – Echo Canceller Type
Use to define the echo canceller
type for H.323.
0~3
(default = 0)
3
84-01-61 H.323 Trunk Basic Information
Setup – Auto Gain Control
Use to define the auto gain control
for H.323.
0~5
(default = 0)
3
84-01-62 H.323 Trunk Basic Information
Setup – DTMF Relay Mode
Set up information of VoIP is set by
Program 84-06-10.
0 = VoIP
1 = RFC2833
2 = H.245
3 = Disable
(default = 0)
3
84-01-63 H.323 Trunk Basic Information
Setup – Number of G.722 audio
frames
Use to define the number of G.722
audio frames for H.323.
1~4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
(default = 3)
3
84-01-64 H.323 Trunk Basic Information
Setup – G.722 Voice Activity
Detection Mode
Use to define the G.722 voice
activity detection mode for H.323.
0 = Disable
1 = Enable
(default = 0)
3
84-01-65 H.323 Trunk Basic Information
Setup – G.722 Jitter Buffer (min)
Use to define the G.722 jitter buffer
(minimum) for H.323.
0~160ms
(default = 30
3
84-01-66 H.323 Trunk Basic Information
Setup – G.722 Jitter Buffer
(average)
Use to define the G.722 jitter buffer
(average) for H.323.
0~160ms
(default = 60)
3
84-01-67 H.323 Trunk Basic Information
Setup – G.722 Jitter Buffer (max)
Use to define the G.722 jitter buffer
(maximum) for H.323.
0~160ms
(default = 120)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3