NEC Univerge SV8100 - Page 687

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 663
10-03-20 ETU Setup (PRTA PKG Setup) –
Network Exchange Selection
Select the ISDN protocol for the
ISDN circuit.
0 = Standard (Same as
NI-2)
1 = reserved
2 = reserved
3 = DMS (A211)
4 = 5ESS
5 = DMS (A233)
6 = 4ESS
7 = NI-2
(default = 0)
3
10-03-21 ETU Setup (PRTA PKG Setup) –
PRI Number of Ports
Select the number of ports for the
PRI.
0 = Auto
1 = 4 Ports
2 = 8 Ports
3 = 12 Ports
4 = 16 Ports
5 = 20 Ports
(default = 0)
3
10-39-01 Fractional Setup Use this to enable (1) or disable
(0) the T1/PRI fractional function.
0 = Disable
1 = Enable
(default = 0)
3
14-05-01 Trunk Group – Trunk Group
Number
Assign trunks to trunk groups then
go to Program 14-06-01 below to
set up Trunk Group Routing.
Trunk Group Number:
0~100 Priority Number:
1~200 (default = Trunk
Group 1, with priority in
ascending order.)
3
21-01-03 System Options for Outgoing
Calls – Trunk Interdigit Time
(External)
The time the system waits for the
timer to expire before placing the
call in a talk state.
0~64800 (seconds)
(default = 5)
3
21-12-01 ISDN Calling Party Number
Setup for Trunks – Calling Party
Number Data
Assign Calling Party Numbers for
each trunk (maximum 16 digits per
entry).
 After the above programming
is complete a reset of the
CD-PRTA is required.
(maximum 16 digits)
1-0, ,
#
Default:
(All trunks = No setting)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3