NEC Univerge SV8100 - Page 709

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 685
Operation
To redial your last call:
1. Without lifting the handset, press Redial.
 The last dialed number is displayed.
2. To redial the last number, press #.
- OR -
Search for the desired number from the Redial List by pressing Redial or VOLUME  or VOLUME
 keys.
3. Lift the handset or press Speaker to place the call.
 The system automatically selects a trunk from the same group as your original call and dials the last number
dialed.
- OR -
1. At the multiline terminal, press Speaker or lift the handset (optional).
 The system automatically selects a trunk from the same group as your original call.
2. Press Redial.
- OR -
At the single line telephone, lift the handset.
3. Dial
#5.
 The system automatically selects a trunk from the same group as your original call and dials the last number
dialed.
To check the number saved for Last Number Redial:
1. Press Redial.
 The stored number displays for six seconds. The stored number dials out if you:
- Lift the handset,
- Press an idle line key,
- or -
- Press Speaker.
2. Press the Exit key.
To erase the stored number:
1. At the multiline terminal, press Speaker or lift handset.
- OR -
At the single line telephone, lift the handset.
2. Dial 776.