NEC Univerge SV8100 - Page 722

Issue 1.0 UNIVERGE SV8100
2 - 698 Line Preference
Operation
Ringing Trunk or intercom (ICM) call:
Lift the handset or press Speaker.

The setting assigned for Program 15-02-10 and Program 22-01-01 determines which call is answered first.
15-06-01 Trunk Access Map for
Extensions
For Outgoing Line Preference and
Auto-Answer of Non-Ringing Lines,
assign trunk Access Maps to
extensions.
Trunk Access Maps:
1~200
(default = 1)
3
20-10-07 Class of Service Options
(Answer Service) – Automatic
Off-Hook Answer
Turns Off (0) or On (1) an
extension to use Universal Auto
Answer (no service code required).
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
22-01-01 System Options for Incoming
Calls – Incoming Call Priority
Use this option to determine if
Intercom calls or trunk calls have
answer priority when both are
ringing simultaneously.
0 = Intercom call priority
1 = Trunk call priority
(default = 1)
3
22-04-01 Incoming Extension Ring Group
Assignment
Assign extensions to ring groups.
Auto-Answer for Non-Ringing
Lines only works for trunks that do
not ring an extension.
Maximum eight digits
Default:
Extensions 101~108 (first
eight ports) ring for
incoming Ring Group 1
calls. No other
extensions ring for
incoming Ring Group 1
calls.
3
22-05-01 Incoming Trunk Ring Group
Assignment
Assign trunks to ring groups. Auto-
Answer for Non-Ringing Lines only
works for trunks that do not ring an
extension.
Incoming Group Number
for Day/Night Mode
(1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or VM8000
InMail)
(default = 1)
3
23-03-01 Universal Answer/Auto Answer Use this program to let an
extension user automatically
answer trunk calls that ring other
extensions. When the user lifts the
handset, they automatically answer
the ringing calls based on Trunk
Group Routing programming
(defined in Program 14-06).
Maximum eight digits
Day/Night Mode
1~8
Route Table Number
0~100
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3