NEC Univerge SV8100 - Page 740

Issue 1.0 UNIVERGE SV8100
2 - 716 Meet Me Paging Transfer
Operation
Meet Me External Paging Transfer
To make a Meet Me External Paging Transfer:
1. At the multiline terminal, while on a call, press Hold.
- OR -
At the single line telephone, while on a call, hookflash.
2. Press the External Paging Zone key (Program 15-07 or SC 751: 19 + zone or 20 for all external
zones).
- OR -
Dial 703 and the External Paging Zone code (1~8 or 0 for All Call).
- OR -
Dial 1 and the Combined Paging Zone code 1~8 (for Internal/External Zones 1~8) or 0 (for Internal/
External All Call).
3. Announce the call.
4. From a multiline terminal, when the paged party answers, press Transfer or the Transfer softkey.
- OR -
From a single line telephone, when the paged party answers, hang up.
 The party is transferred.
To join a Meet Me External Paging Transfer:
1. At the multiline terminal, press Speaker or pick up handset.
- OR -
At single line telephone, lift the handset.
2. Dial 765.
3. Dial the announced External Paging Zone (0~8).
 The Paging party is connected.
4. Stay on the line.
From a multiline terminal, press Transfer or the Transfer softkey.
- OR -
From a single line telephone, hang up.
 The party is transferred.