NEC Univerge SV8100 - Page 741

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 717
Meet Me Internal Paging Transfer
To make a Meet Me Internal Paging Transfer:
1. At multiline terminal, while on a call, press Hold.
- OR -
At the single line telephone, while on a call, hookflash.
2. Press Internal Paging Zone key (Program 15-07 or SC 751: 21 + zone or 22 for all internal zones).
- OR -
Dial 701 and the Internal Paging Zone code (0~9 or 00~64).
- OR -
Dial 1 and the Combined Paging Zone code 1~8 (for Internal/External Zones 1~8) or 0 (for Internal/
External All Call).
3. Announce the call.
4. From a multiline terminal, when the paged party answers, press Transfer or the Transfer softkey.
- OR -
From a single line telephone, when the paged party answers, hang up.
 The party is transferred.
To join a Meet Me Internal Paging Transfer:
1. At the multiline terminal, press Speaker or pick up handset.
- OR -
At the single line telephone, lift the handset.
2. Dial 763 (if your extension is in the zone called).
- OR -
Dial 764 and the zone number (if your extension is not in the zone called).
- OR -
Press the Meet Me Conference/Paging Pickup key (Program 15-07 or SC 751: 23) if your extension
is in the zone called.
3. Stay on the line.
From a multiline terminal, when the paged party answers, press Transfer or the Transfer softkey.
- OR -
From a single line telephone, when the paged party answers, hang up.
 The party is transferred.