EasyManua.ls Logo

NEC Univerge SV8100 - Page 790

NEC Univerge SV8100
1386 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Issue 1.0 UNIVERGE SV8100
2 - 766 Music on Hold
14-08-01 Music on Hold Source for Trunks –
MOH Type
For each trunk, set the Music on
Hold source.
0 = Internal/External MOH
1 = Customer Provided
Source Connected to
BGM Port
2 = Customer Provided
Source Connected to ACI
Port
(default = 0)
3
14-08-02 Music on Hold Source Port
Number – Source Port Number
If the MOH type is 2 in Program
14-08-01, for each trunk enter the
ACI source port number (1~96).
Source port 0-96 (default =
0)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
3
20-07-02 Class of Service Options
(Administrator Level) – Changing
the Music on Hold Tone
Turns Off or On an extension ability
to change the Music on Hold tone.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
3
22-11-09 DID Translation Number
Conversion – Music On Hold
Source
For each DID Translation Table
entry (1~2000), specify the source
of music to be used for DID trunks.
0 = IC/MOH Port
1 = BGM Port
2 = ACI Port
(default = 0)
3
22-11-10 DID Translation Number
Conversion – ACI Music Source
Port
For each DID Translation Table
entry (1~2000), if item 2 is selected
in Program 22-11-09, specify the
port to be used for the source of
music heard on DID trunks.
When a sound source type
is 2 in above : (0~96)
(default = 0)
3
80-01-01 Service Tone Setup – Music On
Hold Tone (Service Tone 64)
Used to customize the repeat count
for the musing on hold tone if
Program 10-01-01 is set to 2.
0~255 (0=Until On-Hook)
(Default 0)
Refer to Table 2-14
Service Tone Setup,
Program 80-01-01 on
page 2-555
3
80-01-02 Basic Tone Number Used to customize the basic tone
number for the musing on hold tone
if Program 10-01-01 is set to 2.
1~33
(0 = No Tone)
(33=Default Time Slot)
3
80-01-03 Duration Count Used to customize the duration
count for the musing on hold tone if
Program 10-01-01 is set to 2.
1~255 (100~25500ms)
3
80-01-04 Gain Level (dB) Used to customize the Gain Level
for the musing on hold tone if
Program 10-01-01 is set to 2.
1~63 (-15.5 ~ +15.5)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3

Table of Contents

Other manuals for NEC Univerge SV8100

Related product manuals