UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 767
When Using a PGD(2)-U( ) ADP:
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
10-03-01 ETU Setup (DLC PKG Setup) –
Terminal Type (B1)
If a PGD(2)-U( ) ADP is used for the
external music source, the module
is automatically assigned type 9 if
the jumper straps in the module
were set prior to connecting it to the
system. If another type was
assigned, disconnect the PGD(2)-
U( ) ADP from the system, delete
the type setting, and, with the
jumper straps positioned correctly
in the PGD(2)-U( ) ADP, reconnect
the module to the system. Refer to
the UNIVERGE SV8100 System
Hardware Manual for the jumper
strap settings.
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
3
11-06-01 ACI Extension Numbering Each ACI port must be assigned an
extension number. Use this
program to assign the extension
numbers to ACI software ports.
Select a number outside of the
normal extension number range.
ACI Ports: 1~96
(default not assigned)
3
11-08-01 ACI Group Pilot Number Assign pilot numbers to ACI groups.
When a user dials the pilot number,
they reach an available ACI
software port within the group.
ACI Groups: 1~16
(default not assigned)
3
33-01-01 ACI Port Type Setup Set each ACI software ports for
input (1) or input/output (2). Use
input ports for Music on Hold
sources. Use output ports for
External Paging/Ringer Control.
ACI Ports: 1~96
ACI Types:
0 = None
1 = MOH/BGM (Input)
2 = External Audio
Port (Input/Output
(default = 2)
3
33-02-01 ACI Department Calling Group Assign ACI software ports to an ACI
Department Group. This lets ACI
callers connect to ACI software
ports by dialing the group pilot
number (set in Program 11-08).
ACI Ports: 1~96
ACI Groups: 1~16
Default:
ACI Port/Group/Priority
01/ 1/ 1
02/ 1/ 2
: / :/ :
96/ 1/ 96
Refer to Analog
Communications
Interface (ACI) on
page 2-37 for
additional
information.
3
To Next Page
Loading...
