NEC Univerge SV8100 - Page 806

Issue 1.0 UNIVERGE SV8100
2 - 782 Night Service
22-04-01 Incoming Extension Ring Group
Assignment
To have trunks ring extensions
during the different Night Service
modes (for ANA), assign extensions
to Ring Groups. For each extension
in the Ring Groups (1~100),
indicate in Program 22-06-01 if
trunk should ring (1) or not ring (0).
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
3
22-05-01 Incoming Trunk Ring Group
Assignment
To have trunks ring extensions for
ANA, assign trunks to Ring Groups
(1~100), You make a different entry
for each Night Service mode.
Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or VM8000
InMail)
(default = 1)
3
22-08-01 DIL/IRG No Answer Destination If a Universal Answer call rings
longer than the DIL No Answer
Time (Program 22-01-04), it routes
to the Ring Group specified in this
option
.
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or VM8000 InMail)
(default = 1)
3
31-05-01 Universal Night Answer/Ring
Over Page
For each Night Service Mode,
assign which trunks should ring
which External Paging Zones.
0 = No Ringing (No)
1 = Ringing (Yes)
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3