NEC Univerge SV8100 - Page 805

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 781
15-06-01 Trunk Access Map for
Extensions
For Universal Night Answer (UNA)
answering, assign Trunk Access
Maps (1~200) to extensions. Make
one entry for each Night Service
mode.
Trunk Access Maps:
1~200
(default = 1)
3
15-07-01 Programmable Function Keys Assign Night Service function keys
(09) to extensions and set the key
for the proper mode (Day, Night,
Rest, etc.). If the additional data is
set to 0, the toggle mode is
assigned.
For Line Keys: 1~48
0 ~ 99 (Normal
Function Code)
(default = Service
Code 751)*
00

~

99
(Appearance Function
Code) (default =
Service Code 752)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
20-07-01 Class of Service Options
(Administrator Level) – Manual
Night Service Enabled
Turns Off (0) or On (1) an extension
for manually Switching the Night
Mode (Service Code 718). This
option must be enabled for an
extension to be able to display the
Night indication.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
3
20-10-07 Class of Service Options
(Answer Service) – Automatic
Off-Hook Answer
Turns Off (0) or On (1) an extension
to use Universal Auto Answer (no
service code required).
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
22-02-01 Incoming Call Trunk Setup Assign the incoming trunk type for
each trunk. There is one item for
each Night Service Mode (1~8).
0 = Normal
1 = VRS (second dial
tone if no VRS
installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3