Issue 1.0 UNIVERGE SV8100
2 - 818 Park
A user can display the Caller ID of a call in Park if Caller ID is enabled (1) in Program 20-09-
02.
Park keys can be assigned on DSS consoles.
Calls on virtual extension keys cannot be put in Personal Park if Program 15-18-01 is set to
Land on the key (1).
Function keys simplify Park operation.
Calls on Virtual Extension keys cannot be Call Parked.
One Touch keys programmed for Park Hold Service Code cannot be used to park calls
without using Hold or Transfer.
Call Park – Step Call is supported in the local system only.
A parked call cannot be retrieved from Hold Dial Tone (Second dial tone).
Default Setting
Enabled
System Availability
Terminals
All Terminals
Required Component(s)
None
Status
Using 3-Digit
Service Code
Using 1-Digit Service
Code
Using
Personal Park
Key
Speaking Not Available Not Available Available
ICM Dial Tone or Busy Tone Available Not Available Available
Calling Another Extension Not Available Available
(with outside call on hold
and when called extension
does not answer)
Available
Receiving a Personal Park Recall Not Available Not Available Available
To Next Page
Loading...
