UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 819
Related Features
Caller ID
Call Arrival (CAR) Keys
Direct Station Selection (DSS) Console
Hold
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
11-12-31 Service Code Setup (for Service
Access) – Park Hold
Set the service code which should
be used for placing a call in Park.
MLT, SLT
(default:
#6)
3
11-12-32 Service Code Setup (for Service
Access) – Answer for Park Hold
Set the service code which should
be used for answering a call in
Park.
MLT, SLT
(default:
#6)
3
11-12-35 Service Code Setup (for Service
Access) – Station Park Hold
Set the service code to be used for
placing a call in a Personal Park.
MLT, SLT
(default = 757)
3
11-16-11 Single Digit Service Code Setup –
Station Park Hold
Customize the one-digit service
code to be used when placing a call
in Personal Park.
(default not assigned)
3
15-02-08 Multiline Telephone Basic Data
Setup – Automatic Handsfree
Use this option to set whether
pressing a One-Touch key
preselects the key or goes off-hook
to access the key.
0 = Preselect
1 = One-Touch
(Automatic Handsfree)
(default = 1)
3
15-07-01 Programmable Function Keys Assign a keys as a Park Orbit key
(code 04 plus Park orbit number
[01~64]) or as a Personal Park key.
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~
99 (Appearance
Function Code) (Service
Code 752 by default)
3
To Next Page
Loading...
