NEC Univerge SV8100 - Page 844

Issue 1.0 UNIVERGE SV8100
2 - 820 Park
15-18-01 Virtual Extension Key Enhanced
Options – Virtual Extension Key
Operation Mode
This program sets whether an
incoming call to a Virtual Extension/
CAR resides on the Virtual
Extension/CAR key once answered
(1) or appears on a CAP Key/CO
Appearance Line key (0). This
setting applies to Multiline
Terminals, single line telephones
and virtual extension numbers.
0 = Release
1 = Land On the Key
(default = 0)
3
15-18-02 Virtual Extension Key Enhanced
Options – Display Mode when
pacing a call on Virtual Extension
Key
Defines if calls to or from a Virtual
Extension Key display the Virtual
Extension Key name or the name of
the extension it resides on.
0 = Secondary Extension
Name
1 = Actual Station Name
(default = 0)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
3
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
Determine whether an extension
Class of Service should allow
normal or extended Park
(0 = Normal, 1 = Extended).
0 = Off
1 = On
(default = 0 for COS
1~15)
3
20-11-24 Class of Service Options (Hold/
Transfer Service) – Trunk Park
Hold Mode
Set the hold type when a trunk call
is put on hold by an extension.
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold (On)
(default = 1 for
COS 1~15)
3
20-11-25 Class of Service Options (Hold/
Transfer Service) – Transfer Park
Call
Turns On or off an extensions
ability to transfer a parked call.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-27 Class of Service Options (Hold/
Transfer Service) – Call Park
Automatically Search
Use this option to Turns On (1) or
Off (0) using the Call Park
Automatically Search option.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
24-01-02 System Options for Hold – Hold
Recall Callback Time
A trunk recalling from Hold or Park
rings an extension for this time.
After this time the system invokes
the Hold recall time again. Cycling
between Hold recall time and
callback time and normal or
extended (Recall) Park Hold time
continues until a user answers the
call.
0~64800 (seconds)
(default = 0)
3
24-01-06 System Options for Hold – Park
Hold Time - Normal
Set the Park Hold Time. A call left
parked longer than this time recalls
the extension that initially parked it.
0~64800 (seconds)
(default = 90 seconds)
3
24-01-07 System Options for Hold – Park
Hold Time - Extended (Recall)
Set the Extended Park Hold Time.
A call left parked longer than this
time recalls the extension that
initially parked it.
0~64800 (seconds)
(default = 300 seconds)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3