Issue 1.0 UNIVERGE SV8100
2 - 838 PC Programming
Operation
Refer to the UNIVERGE SV8100 PC Programming Manual for details of operation.
PCPro and WebPro Comparison
The table below gives a quick feature comparison of PCPro and WebPro. For further details refer to the
UNIVERGE SV8100 PC Programming Manual.
90-02-03 Programming Password Setup –
User Level
Use to set the system password
user levels.
0 = Prohibited User
1 = MF (Manufacturer
Level)
2 = IN (Installer Level)
3 = SA (System
Administrator Level 1)
4 = SB (System
Administrator Level 2)
5 = UA (User
Programming Level 1)
Refer to the SV8100
Programming Manual for
default settings.
3
90-26-01 Program Access Level Setup –
Maintenance Level
Define access levels to each
program. This program defines
which administrator accounts in
Program 90-02 can access the
program. If a program is not
accessible, it does not appear in
PCPro/WebPro.
1 = MF Level
2 = IN Level
3 = SA Level
4 = SB Level
Default:
Refer to the Level
indication for each
individual program
(located in the upper left
corner at the beginning
of each program).
3
Feature
Feature
Application
Comments
PCPro WebPro
Installation Program
Y–
File Handling File New/Open/Save/Save As
Y–
File Properties
Y – PCPro supports save/view/modify KTS
Site Information, password protect files,
add notes, connection settings.
Version Conversion
Y – PCPro can convert databases between
different KTS versions.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
To Next Page
Loading...
