Issue 1.0 UNIVERGE SV8100
2 - 860 Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
15-07-01 Programmable Function Keys Assign the functions of a multiline
terminal Programmable Function
Keys. When using Program 15-07-
01 to program the function keys
17~32 on the D16(LD)-R( ) ADM
start with key 17. Service codes
751 and 752 can also be used to
program these keys.
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~
99 (Appearance
Function Code) (Service
Code 752 by default)
3
15-20-01 LCD Line Key Name Assignment Used to define the Line Key Name
for line keys on DESILESS
terminals.
Up to eight digits
Up to 13 characters
Key Number:
01~16 (for 16LD TEL)
17~32 (for 16LD ADM)
Default:
LK01 CO001
: :
LK08 CO006
LK09 All Blank
: :
LK32 All Blank
3
20-06-01 Class of Service for Extensions Assign Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
3
20-07-10 Class of Service Options
(Administrator Level) –
Programmable Function Key
Programming (Appearance
Level)
Turns Off (0) or On (1) the ability
for an extension to program the
Appearance function keys using
Service Code 752.
When programming a feature
as a Programmable Function
Key, refer to Program
15-07-01 in the UNIVERGE
SV8100 Programming
Manual.
0 = Off
1 = On
(default = 1 for COS
01~15)
3
To Next Page
Loading...
