UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 861
Operation
To change a 2-digit programmable key:
1. Press Speaker.
2. Dial 751 for 2-digit codes.
3. Press the key you want to program.
4. Enter the 2-digit key function, any additional information needed for the key and press Hold.
For available functions codes refer to Program 15-07 in the UNIVERGE SV8100 Programing Manual.
To undefine a key, enter 00.
To change a 3-digit programmable key:
1. Press Speaker.
2. Dial 752 for 3-digit codes.
3. Press the key you want to program.
4. Enter the 3-digit key function and any additional information needed for the key.
For available functions codes, refer to Program 15-07 in the UNIVERGE SV8100 Programing Manual.
To undefine a key, enter 000.
When a key is programmed using service code 752, that key cannot be programmed with a function using the 751
code until the key is undefined (000). For example with a Park Key programmed by dialing 752 +
04 must be
undefined by dialing 000 before it can be programmed as a Voice Over key by dialing 751 + 48.
To check the function of a programmable key:
1. Press the Help key.
2. Press the programmable key.
The programmed function displays.
20-13-18 Class of Service for Options
(Supplementary Service) –
Programmable Function Key
Programming (General Level)
Turns Off (0) or On (1) an
extension user ability to program
General function keys using
Service Code 751 (by default).
(Refer to Program 20-07-10 for
Service Code 752.)
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-49 Class of Service for Options
(Supplementary Service) – BLF
Indication on CO Incoming State
Turns On (1) or Off (0) the BLF
Indication on CO Incoming State.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
To Next Page
Loading...
