NEC Univerge SV8100 - Page 913

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 889
22-02-01 Incoming Call Trunk Setup Assign the incoming trunk type (0)
for each trunk. There is one item for
each Night Service Mode.
 This option must be set to 0
for Ring Groups to work.
Day/Night Mode: 1~8
0 = Normal
1 = VRS (second dial tone
if no VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
3
22-04-01 Incoming Extension Ring Group
Assignment
Assign extensions to ring groups. Maximum eight digits
Default:
Extensions 101~108 (first
eight ports) ring for
incoming Ring Group 1
calls. No other extensions
ring for incoming Ring
Group 1 calls.
3
22-05-01 Incoming Trunk Ring Group
Assignment
Assign trunks to ring groups. Incoming Group Number
for Day/Night Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or VM8000
InMail)
(default = 1)
3
22-06-01 Normal Incoming Ring Mode Define whether or not an extension
should ring for the Normal Incoming
Ring Mode.
0 = No Ring
1 = Ring
(default = 1)
3
22-08-01 DIL/IRG No Answer Destination For DIL Delayed Ringing, assign
the DIL No Answer Ring Group. An
unanswered DIL rings this group
after the DIL No Answer Time
(Program 22-01-04) expires. DIL
Delayed Ringing can also reroute
outside calls ringing a Ring Group
In-Skin/External Voice Mail, or
Centralized Voice Mail.
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or VM8000 InMail)
(default = 1)
3
22-12-01 DID Intercept Ring Group For each DID Translation Table,
assign the destination for DID
Intercept. The destination can be a
Ring Group, In-Skin/External Voice
Mail, or Centralized Voice Mail. For
each table, make a separate entry
for each Night Service mode.
0 (No Setting)
1~100 (Incoming Ring
Group)
102 (In-Skin/External
Voice Mail or VM8000
InMail)
(default = 1)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3