Issue 1.0 UNIVERGE SV8100
2 - 890 Ring Groups
Use the charts below to program the following example:
25-03-01 VRS/DISA Transfer Ring Group
With Incorrect Dialing
Set the transfer destination for each
DISA and Automated Attendant
(OPA) trunk. The destination can
be a Ring Group or Voice Mail.
Make a separate entry for each
Night Service mode.
For incoming calls, Ring
Group programming (Program
22-04/Program 22-05)
overrides Access Map
programming (Program 14-07/
Program 15-06).
(Mode 1~8) All Trunks =
Ring Group 1
3
For this extension . . .
1, 2
301 Trunk 1 Rings Trunk 2 Flashes Trunk 3 Flashes
302 Trunk 1 Flashes Trunk 2 Rings Trunk 3 Flashes
303 Trunk 1 Flashes Trunk 2 Flashes Trunk 3 Rings
1
Trunks ring the same in the day as at night.
2
MLT has trunk appearances not CAP keys.
Program 22-04 : Incoming Extension Ring Group Assignment
Ring Group
1
>
123
Trunk 1 X- -
Trunk 2 -X-
Trunk 3 --X
X = Trunk assigned to indicated Ring Group
1
Make the same PRG 22-04 entry for all Night Service modes.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
To Next Page
Loading...
