NEC Univerge SV8100 - Page 929

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 905
Operation
To save the outside number you just dialed (up to 24 digits):

Use this feature before hanging up.
Multiline Terminal
1. Press the Save Number Dialed key (Program 15-07 or SC 751: 30).
Single Line Telephone
1. Hookflash.
2. Dial 715.
To redial a saved number:
Multiline Terminal
1. Press an idle trunk line key.
 This selects a specific trunk for the call.
2. Press the Save Number Dialed key (Program 15-07 or SC 751: 30).
 The stored number dials out.
- OR -
1. Press Speaker.
2. Dial 715.
- OR -
Press Save Number Dialed key (Program 15-07 or SC 751: 30).
 Save Number Dialed automatically selects a trunk from the same group as your original call.
 The stored number dials out.
Single Line Telephone
1. Go off-hook.
2. Dial 715.
To view the number you have saved from a multiline terminal with a display:
1. Press the Save Number Dialed key (Program 15-07 or SC 751: 30).
 The stored number displays for 10 seconds.
 The stored number dials out if you:
 Lift the handset,
 Press an idle line key,
 Press the Speaker key.
2. Press the Exit key.