NEC Univerge SV8100 - Page 933

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 909
15-01-01 Basic Extension Data Setup –
Extension Name
Define the extension/virtual
extension name.
Up to 12 characters
Default:
STA 101 = Ext 101
STA 102 = Ext 102, etc.
3
15-02-07 Multiline Telephone Basic Data
Setup – Automatic Hold for CO
lines
When talking on a CO call and
another CO line key is pressed, the
original trunk is placed on Hold (0) or
Disconnected (1).
0 = Hold
1 = Disconnect (Cut)
(default = 1)
3
15-02-21 Multiline Telephone Basic Data
Setup – Virtual Extension Access
Mode (When idle Virtual
Extension key pressed)
Determine whether a Virtual
Extension/Call Arrival Key (CAR)
should function as a DSS key, a
Virtual Extension, or a CAR key.
When DSS (0) is selected, the key
functions as a DSS key to the
extension and for incoming calls to
that extension. When Outgoing (1) is
selected, the key functions as a
virtual extension and can be used for
incoming and outgoing calls. When
Ignore (2) is selected, the key
functions as a CAR key and can
receive incoming calls only.
Virtual Extension Key
Mode
0 = DSS
1 = OTG (Outgoing)
2 = Ignore
(default = 2)
3
15-02-30 Multiline Telephone Basic Data
Setup – Toll Restriction Class
Select the Toll Restriction Class to be
used when placing a call from a
virtual extension.
0 = Vir. Ext. (Virtual
Extension Class)
1 = Real Ext. (Real
Extension Class)
(default = 1)
3
15-07-01 Programmable Function Keys Assign the SIE key to the Multiline
extension.
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

00 ~

99 (Appearance
Function Code)
(Service Code 752 by
default)
3
15-08-01 Incoming Virtual Extension Ring
Tone Setup
When an extension or a virtual
extension is assigned to the function
key on the key telephone, select the
ring tone when receiving a call on
that key.
For ACD CAR keys, only tone
pattern 1 (entry 0) can be used. The
remaining patterns are not checked
with this feature.
ICM Tone Pattern,
0 = Pattern 1
1 = Pattern 2
2 = Pattern 3
3 = Pattern 4
4 = Incoming Ring Tone
Extension
(default = 0)
3
15-09-01 Virtual Extension Ring
Assignment
Use to assign the ringing options for
an extension Virtual Extension Key
or Virtual Extension Group Answer
Key which is defined in Program
15-07.
Mode 1:
0 = No Ringing
1 = Ring
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3