NEC Univerge SV8100 - Page 934

Issue 1.0 UNIVERGE SV8100
2 - 910 Secondary Incoming Extension
15-10-01 Incoming Virtual Extension Ring
Tone Order Setup
When two or more virtual extensions
are set on a function key on the
telephone, and the tone pattern by
which the sound of each extension
differs, the priority of ring sound is set
up.
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension
Ring Tone
Order 1 Pattern 0 =
Pattern 1 (default)
Order 2 Pattern 1 =
Pattern 2 (default)
Order 3 Pattern 2 =
Pattern 3 (default)
Order 4 Pattern 3 =
Pattern 4 (default)
3
15-11-01 Virtual Extension Delayed Ring
Assignment
Use to assign the delayed ringing
options for an extension Virtual
Extension or Virtual Extension Group
Answer keys (defined in Program 15-
09).
KY01 Mode 1:
0 = Immediate Ring
1 = Delayed Ring
(default = 0)
3
15-18-01 Virtual Extension Key Enhanced
Options – Virtual Extension Key
Operation Mode
Define key operation mode when the
Virtual Extension key is pressed with
it showing an incoming call.
0 = Release (Release
to Line Appearance)
1 = Land On the Key
(default = 0)
3
15-18-02 Virtual Extension Key Enhanced
Options – Display mode when
placing a call on Virtual
Extension Key
Defines if calls to or from a Virtual
Extension Key display the Virtual
Extension Key name or the name of
the extension it resides on.
0 = Secondary
Extension Name
1 = Actual Station
Name
(default = 0)
20-04-03 System Options for Virtual
Extensions – CAR/SIE/Virtual
Extension Delay Interval
CAR Keys/SIE Keys/Virtual
Extensions set for Delayed Ringing
(see Program 15-11) ring the
extension after this interval.
0~64800
(default = 10 seconds)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
20-07-10 Class of Service Options
(Administrator Level) –
Programmable Function Key
Programming (Appearance
Level)
Turns Off (0) or On (1) the ability for
an extension to program the
Appearance function keys using
Service Code 752.
0 = Off
1 = On
(default = 1 for COS
01~15)
3
20-10-08 Class of Service Options
(Answer Service) – Virtual
Extension Off-Hook Answer
Turns Off (0) or On (1) an extension
ability to answer an incoming call on
a Call Arrival (CAR)/Secondary
Incoming Extension (SIE)/ Virtual
Extension simply by lifting the
handset.
0 = Off
1 = On
(default = 1 for COS
1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3