Issue 1.0 UNIVERGE SV8100
2 - 920 Selectable Display Messaging
System Availability
Terminals
All Multiline Terminals with Display
Required Component(s)
None
Related Features
Do Not Disturb
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
11-11-14 Service Code Setup (for Setup/
Entry Operation) – Text Message
Setting
Define the service code to be used
when setting a text message.
MLT
(default not assigned)
3
15-07-01 Programmable Function Keys Assign a function key for Text
Message (code 18). The Text
Message key automatically selects
the message used when
programming the key.
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~
99 (Appearance
Function Code) (Service
Code 752 by default)
3
To Next Page
Loading...
