NEC Univerge SV8100 - Page 945

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 921
20-01-02 System Options – Text Message
Mode
Select whether and intercom caller
should hear busy (1) or ring
through (0) for extensions which
have Selectable Display
Messaging set.
 Any extension previously set
with Selectable Display
Messaging must cancel the
feature and reactivate for a
change in this option to take
affect.
0 = Call mode
1 = No Answer/
Busy mode
(default = 1)
3
20-02-07 System Options for Multiline
Telephones – Time and Date
Display Mode
Set the System Time and Date
display mode. The time that
displays in Selectable Display
Messages follows this setting.
1~8
Type 1 = (12 hour) 10
MAR TUE 3:15PM
Type 2 = (12 hour)
3:15PM MAR 10 TUE
Type 3 = (12 hour) 3-10
TUE 3:15 PM
Type 4 = (12 hour)
3:15PM TUE 10 MAR
Type 5 = (24 hour) 10
MAR TUE 15:15
Type 6 = (24 hour) 15:15
MAR 10 TUE
Type 7 = (24 hour) 3-10
TUE 15:15
Type 8 = (24 hour) 15:15
TUE 10 MAR
(default = 4)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
3
20-13-19 Class of Service Options
(Supplementary Service) –
Selectable Display Messaging
(Text Messaging)
Turns Off (0) or On (1) an
extension user ability to use
Selectable Display Messaging.
0 = Off
1 = On
(default = 1 for COS
1~15)
3
20-16-01 Selectable Display Messages Program the Selectable Display
Messages (1~20). Refer to the
chart below for character entry.
24 characters
Default:
Refer to Table 2-21
Selectable Display
Messaging Defaults on
page 2-919
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3