Chapter 5 System Data Mode
5-4 NWA-033628-001 Rev.1.0
Using System Data Mode
STEP3: Set system data as needed.
No. Item Description
(1) [Read] button Click to read system data registered in the SV8300. This button is used to
restore system data to the original settings.
(2) [Apply] button Click to write the set system data to the SV8300.
(3) Data Entry field Enter data to be set.
(4) Data selection pull-
down menu
Click to
select data to be set.
(5) Data selection radio
buttons
Check the data to be set.
(6) Button Click to
run the functions of the SV8300.
(2)
(1)
(4)
System Data Mode
submenu
(5)
(3)
(6)
To Next Page
Loading...
