EasyManuals Logo

Ness D8 Installation & Programming Manual

Ness D8
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
32
PROGRAMMING
NESS D8 (V4.7) CONTROL PANEL – INSTALLER MANUAL
RADIO SUPERVISION ALERTS – RESET OUTPUT
Setting this option turns the Reset output ON when a SUPERVISED RADIO alert
occurs. The Reset output will remain ON for the duration of the ALARM TIME (Set
by Option P29E).
PROGRAMMING SEQUENCE:
P66E 1E toggles the option ON and OFF
P66E 1E OFF: Supervision Reset output disabled
P66E 1E ON: Supervision Reset output enabled
P66E 1E
PROGRAM MODE LEVEL:
Installer, Remote by PC
FACTORY DEFAULT:
OFF: Supervision Reset output disabled
NOTES:
RELATED OPTIONS:
P65E Supervised Radio Zones
RADIO SUPERVISION ALERTS – STROBE OUTPUT
Setting this option turns the Strobe output ON when a SUPERVISED RADIO alert
occurs. The Strobe output will remain ON until the panel is disarmed.
PROGRAMMING SEQUENCE:
P66E 2E toggles the option ON and OFF
P66E 2E OFF: Supervision Strobe output disabled
P66E 2E ON: Supervision Strobe output enabled
P66E 2E
PROGRAM MODE LEVEL:
Installer, Remote by PC
FACTORY DEFAULT:
OFF: Supervision Strobe output disabled
NOTES:
RELATED OPTIONS:
P65E Supervised Radio Zones
RADIO SUPERVISION ALERTS – KEYPAD SONALERT & DE LAY ALL
SUPERVISION OUT PUTS
Setting this option turns the Keypad Sonalert ON when a SUPERVISED RADIO
alert occurs. The Keypad Sonalert remains ON until any keypad key is pressed.
Also, turning this option ON makes all Supervision outputs delayed by one minute.
PROGRAMMING SEQUENCE:
P66E 3E toggles the option ON and OFF
P66E 3E OFF: Supervision Keypad Sonalert disabled
AND all Supervision outputs trigger instantly
P66E 3E ON: Supervision Keypad Sonalert enabled
AND all Supervision outputs are delayed by 1 minute
P66E 3E
PROGRAM MODE LEVEL:
Installer, Remote by PC
FACTORY DEFAULT:
OFF: Supervision Keypad Sonalert disabled
NOTES:
When this option is turned ON, it delays
the operation of all other selected
Supervision outputs by one minute.
RELATED OPTIONS:
P65E Supervised Radio Zones
1E 2E 3E 4E 5E 6E 7E 8E
ON = Factory default setting.
Supervision RESET output
Supervis STROBE outpution
Supervis SONALERT outpu
t
ion
Supervis SIREN outpution
Supervis AUX1 outpution
Supervis AUX2 outpution
Supervis speedup x6ion
Supervis speedup x10ion
OPTION No DESCRIPTION
P66E Radio Supervision Alerts

Table of Contents

Other manuals for Ness D8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ness D8 and is the answer not in the manual?

Ness D8 Specifications

General IconGeneral
BrandNess
ModelD8
CategoryControl Panel
LanguageEnglish

Related product manuals