Command with FXS Gateway
- 136 -
Step 3. Ather the configuration [commit] and [reboot] the device.
Usr/config$ commit
usr/config$ reboot
¾ P2P Mode Usage:
Step 1. Set gateway under P2P mode.
Step 2. Create phone book table with [pbook] command.
Step 3. Create a Hotline table with [line] command.
usr/config$ h323 –mode 1
usr/config$ pbook –add name test ip 10.1.1.1 e164 1001
usr/config$ line –config 1 hotline 1001
In this example means: if user picks up phone set of FXS Line1, gateway will
automatically dial out IP address of [1001].
Step 4. Ather the configuration [commit] and [reboot] the device.
usr/config$ commit
usr/config$ reboot
24.4.4 Forward Mode
Set no answer forward table provides No Answer Forward function. For call
To Next Page
Loading...
