Command with FXS Gateway
- 137 -
forward function, it can works under GK or P2P mode.
¾ GK Mode Usage:
Step 1. Setting Line1 busy forward Line2
usr/config$ line –config 1 forward 1002
In this example means: if user calls in FXS Line and hasn’t been answered in
forward time (please refer to [sysconf -forwardtime] command), gateway will
automatically forward this call to phone number [1002].
Step 2. Ather the configuration [commit] and [reboot] the device.
usr/config$ commit
usr/config$ reboot
¾ P2P Mode Usage:
Step 1. Setting Line1 busy forward Line2
usr/config$ line –config 1 forward 1002
In this example means: if user calls in FXS Line1 when Line1 is busy, gateway will
automatically forward this call to IP address of [1002] in Phone book.
Step 2. Ather the configuration [commit] and [reboot] the device.
usr/config$ commit
To Next Page
Loading...
