Command with FXS Gateway
- 186 -
-gkras: To set default gatekeeper RAS port number. Default value, is 1719 well-known
port for RAS communication.
-h225: To set the ras port.(1024~65535)
-q931: To set the call signal port.(1024~65535)
-dstq931: To specify destination H.225 signal port number.
-range: To allocate port range (1024-19999) Gateway may use it.
-respto: Maximum response time out
-connto: Maximum connection time out
-passwd: Set H.235 security password. If user’s GK need H.235 security token
password to authenticate, user have to input open password in this
command.
For example:
usr/config$ h323 -print
H.323 stack relate information
RAS mode : GK mode
Gatekeeper IP address : 192.168.13.71
Second Gatekeeper IP : 192.168.13.71
To Next Page
