Netgate FXS Series - Page 202

Command with FXS Gateway
- 185 -
Gateway type.
-alias: H.323 ID. If in gatekeeper mode, this h.323 ID must be different from others
who are registering to the same gatekeeper.
-display: An addition name for user to recognize in called site.
-gkdis: Set auto discovery function on or off. If this function is enabled and IP address
of GateKeeper is set as 255.255.255.255, Gateway will multicast to search a
GateKeeper on network with configured GateKeeper name; if IP address of
GateKeeper is set, before Gateway register to the assigned GateKeeper, it
will send out GRQ (GateKeeper Request) message with configured
GateKeeper name to GateKeeper first.
-gkid: Set GateKeeper name for GateKeeper discovery. When Gateway send out
GateKeeper discovery message will search GateKeeper with this
GateKeeper name.
-rtp: To allocate RTP port range—NOT RECOMMENDED. This may be used when
RTP port range conflicts with Firewall policy (1024~65532).
-ttl: To set timer for TTL (Time To Live). Gateway would send RRQ, with keep Alive, to
gatekeeper periodically according to TTL timer, default:60 (0~3600 second).
-gkfind: Gatekeeper finding port. Which Gateway uses it to discover a gatekeeper.
Default value is 1718 (1024~65535).