NETGEAR WAC104 User Manual

To connect to the AP over WiFi using a WiFi-enabled computer or mobile device:
1. Connect a WiFi-enabled computer or mobile device to the AP either by using the
manual method or the Wi-Fi Protected Setup (WPS) method:
•
Manual method: Do the following:
a.
Open the software utility that manages your WiFi connections.
The utility scans for all WiFi networks in your area.
b.
Find and select one of the AP’s default WiFi network names (SSIDs), which
are NETGEAR_11N and NETGEAR_11AC.
If you cannot find the SSIDs, press the WiFi On/Off button on the back panel
of the AP, wait one minute, and see if the utility displays one or both of the
SSIDs.
c.
Type the default WiFi passphrase, which is sharedsecret.
•
WPS method: Do the following:
a. For help with the WPS button on your device, check the instructions or online
help that came with that device. (Some older equipment cannot use WPS.)
b.
Press the WPS button on the back panel of the AP.
c. Within two minutes, on your computer or mobile device, press its physical
WPS button or click its onscreen WPS button.
Your computer or mobile device connects to the AP’s WiFi network.
2.
Launch a web browser and enter http://www.aplogin.net or
http://www.aplogin.com in the address field.
These URLs are the same as the IP address 192.168.0.100.
A login window displays.
3. Enter the AP user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The initial set up page displays. This page displays only the first time that you log in
to the local browser user interface (UI).
4.
Set up a new admin password (also called the local device password) and specify
answers to two security questions (you can choose the questions).
The new admin password replaces the default password password, so we
recommend that you write down your new password or save it in another way.
User Manual20Install and Access the AP in Your
Network
802.11ac Wireless Access Point Model WAC104

NETGEAR WAC104 Specifications

General

Ethernet WAN	-
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	867 Mbit/s
Number of WLAN connections (max)	128
WLAN data transfer rate (first band)	300 Mbit/s
Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Antennas quantity	3
Security algorithms	WEP, WPA-PSK, WPA2-PSK
Power source type	AC
Power consumption (typical)	8.1 W
Product type	Tabletop router
Product color	Black
LED indicators	LAN, WPS
USB port	No
Ethernet LAN (RJ-45) ports	4
Storage temperature (T-T)	-120 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Certification	CE (EN60950)
Mean time between failures (MTBF)	285000 h
Cables included	LAN (RJ-45)
Package depth	192 mm
Package width	247 mm
Package height	98 mm
Package weight	780 g
Harmonized System (HS) code	85176990
Shipping (inner) case width	507 mm
Shipping (inner) case height	270 mm
Shipping (inner) case length	399 mm
Shipping (inner) case net weight	8620 g
Number of layers per pallet (sea)	7 pc(s)
Number of cartons per pallet layer	5 pc(s)
Quantity per shipping (inner) case	10 pc(s)

Weight and Dimensions

Depth	181.45 mm
Width	239.65 mm
Height	40.6 mm
Weight	385 g