7. Maker sure that the Wireless Repeater radio button is selected.
8.
In the Repeater IP Address fields, type the IP address of the repeater AP.
This IP address must be in the same subnet as the base station, but different from
the LAN IP address of the base station.
9.
In the Base Station MAC Address field, enter the MAC address of the AP that
functions as the base station.
10. Click the Apply button.
Your settings are saved.
11.
Verify connectivity across the LANs.
If the configuration is set up correctly, a computer on any WiFi or wired LAN segment
of the AP that functions as the repeater can connect to the Internet or share files and
printers with any other computer or server connected to the AP that functions as the
base station.
User Manual81Manage the Advanced WiFi
Features
802.11ac Wireless Access Point Model WAC104
To Next Page
Loading...
